View STI80-0100_2260829.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

synapse? ?smart cable? for pc wedge interface guide 72- 50273-01 revision a november 2000 for the following model configurations: STI80-0100 sti80-0200 sti80-0201 sti80-0300
? 2000 symbol technologies, inc. all rights reserved. symbol reserves the right to make changes to any product to improve reliability, function, or design. symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. no license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which symbol products might be used. an implied license only exists for equipment, circuits, and subsystems contained in symbol products. symbol and the symbol logo are registered trademarks of symbol technologies, inc. other product names mentioned in this manual may be trademarks or registered tradem arks of their respective companies and are hereby acknowledged. symbol technologies, inc. one symbol plaza holtsville, n.y. 11742-1300 http://www.symbol.com
1 pc wedge introduction the synapse? ?smart cable? family provides connection to many host systems by simply changing the synapse cable, so your scanner can interface to virtually any host. the synapse cable you?ve purchased connects symbol scanners transparently to most pcs. this cable allows you to add barcode reading capab ili- ty to any pc, without requiring any change to your application. the synapse cable emulates key- board keystrokes and the barcode data is received by the pc as if it originated in the keyboard. programming there are two types of parameters used to pro- gram your system: scanner parameters, contained in your scanner programming guide, and interface (synapse) parameters, provided in this guide. both types of parameters are stored in the scanner. the default for each synapse parameter is ide nti- fied under the default bar code. if you?re using the default settings, no bar codes need to be scanned to set up synapse. (if you?re using the ls 9100 scanner, the enable ls 9100 communication bar code on 5 must be scanned.) the programming bar codes in this guide can not be used to program other synapse interface cables (cables that are not an sti80-01xx/02xx/03xx).
synapse tm ?smart cable? guide 2 power supply listed below are the terminals supported by your pc wedge synapse cable. because system configu- rations vary, certain hosts may not provide enough power for the system to operate. these systems will require a power supply. if y our host is listed in the first column below, contact your symbol representative to see if a power supply is needed for your system. may require will require power supply power supply ibm pc/at and compatibles ncr 7052 ibm ps/2 and compatibles ibm pc/xt and compatibles ibm ps/2-30
3 pc wedge setup setting up synapse is easy: 1. first, power down your host. 2. plug your synapse module into the scanning cable with the ? s ? -shaped graphics aligned. if you need to disconnect the cable from your synapse module, squeeze the cable at the ? s ? and pull it from the module. 3. connect the scanning cable to the scanner. 4. disconnect the keyboard cable from the host, and plug that end of the cable into the syn- apse mate connector. 5. plug the other synapse connector to the host, where your keyboard cable was initially con- nected. 6. if a power supply is required, plug the power supply in the synapse power jack, and the other end into an ac outlet. 7. power up your host. 8. if you are using an ls 9100 scanner, scan the enable ls 9100 communication bar code on 5. to h o s t to scanner
synapse tm ? smart cable ? guide 4 9. if you are using a host other than the default, scan a host bar code from host selection on page 6. 10. if you are not using a north american key- board, scan the appropriate country bar code from country selection on page 8. 11. if you ? d like to disable ignore unknown characters, see ignore unknown characters on page 11. 12. to change the intercharacter delay, see inter- character delay on page 12. 13. to disable fast transmit, see fast transmit on page 14. see set synapse defaults on page 5 to reset de- faults. for advanced parameter and default fea- tures, see advanced features on page 15. if you ? re having any problems with your system, see what if... on page 25.
5 pc wedge set synapse defaults scan the bar code below to set defaults for the pa- rameters in this guide. see set synapse defaults (advanced) on page 17 for advanced synapse de- fault options. enable ls 9100 communication if you ? re using an ls 9100, scan the bar code be- low to communicate with synapse. you ? ll hear a warble beep. if, after using synapse, a non-syn- apse interface is enabled in your ls 9100 scanner, this bar code will need to be scanned again to re- enable the synapse interface. set synapse pc wedge defaults enable ls 9100 communication
synapse tm ? smart cable ? guide 6 host selection ibm pc/at ibm ps/2 and compatibles (default) ibm pc/xt
7 pc wedge ibm ps/2-30 ncr 7052
synapse tm ? smart cable ? guide 8 country selection north american (default) german
9 pc wedge french french international spanish
synapse tm ? smart cable ? guide 10 swedish british italian
11 pc wedge ignore unknown characters unknown characters are characters the host does not recognize. when send bar codes with un- known characters is selected, all bar code data is sent except for unknown characters, and no error beeps are sounded. when do not send bar codes with unknown characters is selected, no bar code data containing at least one unknown char- acter is sent to the host. scan the appropriate bar code to enable or disable this parameter. the default is send bar codes with unknown characters. send bar codes with unknown characters (default) do not send bar codes with unknown characters
synapse tm ? smart cable ? guide 12 intercharacter delay selecting an intercharacter delay gives the host system time to service its receiver and perform other tasks between characters. the default is short delay, so if this is your preference, you don ? t need to scan this bar code unless you ? ve previous- ly selected another option. for systems that can handle faster character trans- mission, the no delay bar code below can be scanned. short (5 ms) delay (default) no (1 ms) delay
13 pc wedge medium (50 ms) delay long (99 ms) delay
synapse tm ? smart cable ? guide 14 fast transmit older systems may require a slower transmission method. if your system still needs additional time to process keyboard data after sett ing an inter- character delay, scan disable fast transmit . enable fast transmit (default) disable fast transmit
15 pc wedge advanced features select parameter set this option allows you to store different parame- ter settings for each place the scanner is used, as well as to select a parameter set once it is pro- grammed. programming parameter sets to program the parameter set where the scanner is connected to a host, scan a select parameter set bar code, then scan the parameter options in this guide needed for this set. note: because parameter set 1 is the default, you don ? t need to scan this bar code - the first group of parameters you select will automatically be designated parameter set 1. enabling a parameter set to enable the set you ? ll be using after it ? s pro- grammed, scan that select parameter set bar code.
synapse tm ? smart cable ? guide 16 select parameter set 1 (default) select parameter set 2
17 pc wedge set synapse defaults (advanced) scan the following bar code to set defaults for the current parameter set. scan the bar code below to set defaults for all syn- apse cables. set synapse pc wedge defaults: current parameter set set synapse defaults: all cables and parameter sets
synapse tm ? smart cable ? guide 18 translation to control sequence the following barcodes allow a special treatment for the following ascii characters; tab (09), esc (27), bs (08) and cr (13). by default these char- acters are translated by synapse to the following control sequence, respectively; ctrl-i, ctrl-[, ctrl-h, ctrl-m. to disable this translation, scan the barcode be- low. the characters will be sent as the following keystrokes; tab, esc, backspace, enter. this option is particularly useful when sending scanner data into windows applications that interpret ctrl keys in a different way. send control key sequence default send control key codes
19 pc wedge keyboard maps the keyboard maps on the following pages are provided for prefix/suffix keystroke parameters, and are used only with scanners that support data formatting. to program the prefix/suffix values, refer to your scanner ? s programming guide. note: if you are programming an ls 1000 scan- ner, please refer to the ls 1000 product reference guide for keyboard values.
ibm pc/xt 5 001 5 002 5 003 5 004 5 005 5 006 5 007 5 008 5 009 5 010 7 014 7 009 7008 7 013 7012 7 003 7004 7006 7011 7002
7009 7012 7 003 7 004 7 011 7002 7014 7 008 5 009 5 010 5 008 5 007 5 005 5 006 5 003 5 004 5 001 5 002 7 013 ibm pc/at
ibm ps/2 7014 5001 7009 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 7008 7013 7011 7002 7012 7004 7003 7005
5013 5016 5015 5018 1045 1043 5014 5019 5017 7013 (7013 if double key) 1046 5012 5011 1048 (1048 if double key) 5002 5001 5003 5005 5007 5009 5010 5008 5006 5004 ncr 7052 32-key
ncr 7052 58-key 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 1046 5012 043 5014 1045 5013 5015 5016 5018 5019 7013 5017 (1043 if double key) (1048 if double key) 1043 1065 1072 1079 1066 1073 1080 1067 1068 1074 1075 1081 1082 1069 1070 1071 1076 1077 1078 1083 1084 1085 1086 1087 1088 1089 1090 1048
25 pc wedge what if... see the next page if you ? re still having trouble. what if... then... synapse parameters are not working? make sure you ? re using the correct interface guide. make sure you ? ve selected the cor- rect parameter set. if you scanned a set defaults bar code from your scanner man- ual, re-enter your synapse param- eters. no data transmits, or incorrect data transmits, or you hear a lo/lo/lo/lo beep? if you ? re using an ls 9100, scan enable ls 9100 interface. check cable connection to scanner and host. make sure the correct terminal type and country code parameters are set for the currently attached scanner. scanner displays erratic behavior (laser doesn ? t come on, scanner emits frequent beeps)? attach a power supply. check with scanner ? s product reference guide to make sure scanner can communicate with synapse. lo/hi/lo/hi beep sequence sounds? parameter storage space in the scanner is full. scan a set synapse defaults bar code from 5 or 17 for cables no longer in use.
synapse tm ? smart cable ? guide 26 service information before you use the unit, it must be configured to operate in your facility ? s network and run your applications. if you have a problem running your unit or using your equipment, contact your facility ? s technical or systems support. if there is a problem with the equipment, they will contact the symbol support center: warranty symbol technologies, inc. ( ? symbol ? ) manufactures its hardware products in accordance with industry-standard practices. symbol warrants that for a period of twelve (12) months from date of shipment, products will be free from defects in materials and workmanship. united states 1-800-653-5350 canada 905-629-7226 united kingdom 0800 328 2424 asia/pacific 337-6588 australia 1-800-672-906 austria 1-505-5794 denmark 7020-1718 finland 9 5407 580 france 01-40-96-52-21 germany 6074-49020 italy 2-484441 mexico 5-520-1835 netherlands 315-271700 norway 66810600 south africa 11-4405668 spain 9-1-320-39-09 sweden 84452900 latin america sales support 1-800-347-0178 inside us +1-561-483-1275 outside us europe/mid-east distributor operations contact local distributor or call +44 208 945 7360
27 pc wedge this warranty is provided to the original owner only and is not transferable to any third party. it shall not apply to any product (i) which has been repaired or altered unless done or approved by symbol, (ii) which has not been maintained in accordance with any operating or handling instructions supplied by symbol, ( iii) which has been subjected to unusual physical or electrical stress, misuse, abuse, power shortage, negligence or accident or (iv) which has been used other than in accordance with the product operating and handling instructions. preventive maintenance is the responsibility of customer and is not covered under this warranty. wear items and accessories having a symbol serial number, will carry a 90-day limited warranty. non-serialized items will carry a 30-day limited warranty. warranty coverage and procedure during the warranty period, symbol will repair or replace defective products returned to symbol ? s manufacturing plant in the us. for warranty service in north america, call the symbol support center at 1-800-653-5350. international customers should contact the local symbol office or support center. if warranty service is required, symbol will issue a return material authorization number. products must be shipped in the original or comparable packaging, shipping and insurance charges prepaid. symbol will ship the repaired or replacement product freight and insurance prepaid in north america. shipments from the us or other locations will be made f.o.b. symbol ? s manufacturing plant. symbol will use new or refurbished parts at its di scretion and will own all parts removed from repaired products. customer will pay for the replacement product in case it does not return the replaced product to symbol within 3 days of receipt of the replacement product. the process for return and customer ? s charges w ill be in accordance with symbol ? s exchange policy in effect at the time of the exchange. customer accepts full responsibility for its software and data including the appropriate backup thereof. repair or replacement of a product during warranty will not extend the original warranty term.
synapse tm ? smart cable ? guide 28 symbol ? s customer service organization offers an array of service plans, such as on-site, depot, or phone support, that can be implemented to meet customer ? s special operational requirements and are available at a substantial discount during warranty period. general except for the warranties stated above, symbol disclaims all warranties, express or implied, on products furnished hereunder, including without limitation implied warranties of merchantability and fitness for a particular purpose. the stated express warranties are in lieu of all obligations or liabilities on part of symbol for damages, including without limitation, special, indirect, or consequential damages arising out of or in connection with the use or performance of the product. seller ? s liability for damages to buyer or others resulting from the use of any product, shall in no way exceed the purchase price of said product, except in instances of injury to persons or property. some states (or jurisdictions) do not allow the exclusion or limitation of incidental or consequential damages, so the proceeding exclusion or limitation may not apply to y ou. regulatory information radio frequency interference requirements this device has been tested and found to comply with the limits for a class b digital device pursuant to part 15 of the federal communications commissions rules and regulation. these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
29 pc wedge however, there is no guarantee that interference will not occur in a particular installation. if the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: re-orient or relocate the receiving antenna. increase the separation between the equipment and receiver. connect the equipm ent into an outlet on a circuit different from that which the receiver is connected. consult the dealer or an experienced radio/tv technician for help. this device complies with fcc part 15. operation is subj ect to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. radio frequency interference requirements - canada this device complies with rss 210 of i ndustry & science canada. operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. this class b digital apparatus complies with industry canada standard ices-003. cet appareil num rique de la classe b est conform la norme nmb-003 d ? industrie c anada. patents this product is covered by one or more of the following u.s. and foreign patents: u.s. patent no. 4,460,120; 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088;
symbol technologies, inc. one symbol plaza holtsville, ny 11742-1300 70-50273-01 revision a ? november 2000 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,321,246; 5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420, 411; 5, 436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,068,190; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; d305,885; d341,584; d344,501; d359,483; d362,453; d363,700; d363,918; d370,478; d383,124; d391,250; d405,077; d406,581; d414,171; d414,172, d418,500; d419,548; d423,468; d424,035 d431,158; d430,159; d431,562. invention no. 55,358; 62,539; 69,060; 69,187 (taiwan); no. 1,601,796; 1,907,875; 1,955,269 (japan). european patent 367,299; 414,281; 367,300; 367,298; uk 2,072,832; france 81/03938; italy 1,138,713. rev. 09/00

▲Up To Search▲

Price & Availability of STI80-0100

	To Download STI80-0100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .